ERROR CAUSES hard drive unreadable
Damage to the hard drive it could happen due to several causes. Damage such as bad sectors that cause your hard drive unreadable or error. It is important for you to know how to take care of the hard drive is right and good to prevent rapid deterioration. Some other causes of damage to the hard drive you should also know, like the one below:
- Wearing a hard drive in a state are over. Over the hard drive is to use hard drives with full capacity, and rarely done defrag.
- Cleanliness hard drive is not maintained. The body of the hard disk is covered with a very tightly. However, of course it is also possible if the dust that sticks can come in.
- Rarely shut down the computer or put the computer in time for too long, and never restart when used in a long time can cause hard drive errors. If, indeed you must use the computer for a long time, then you should restart occasionally.
- Electricity unstable home. Mengguankan hard drive mechanical devices such as SSD in it not only uses the chipset. The mechanical device of course there are some tools that should continue to move in it like a disc and also headnya. Well, if the voltage is unstable which makes electric current cut off abruptly, of course, can make the mechanical device to be damaged.
Disturbances at the top of the simple things that can make the performance of your hard drive is damaged, of course. All disturbances on the hard disk caused by the foregoing will usually cause damage known as bad sectors, so the hard drive into error and unreadable. Well, what to do if the hard drive to experience it?
TIPS TO CORRECT ERROR hard drive unreadable
The hard drive error-Fixing Tips
The first phase you have to do is check out the pages of your BIOS. On this page there is usually a BIOS setting to OFF makes the hard drive disk unreadable. Please you check the settings.
- If the first phase is already done and still not legible, then do more checks on the electric current from the power supply you. Power supply has a function as a filter flow of electricity to your computer, one of which is the hard drive. Make sure the cord of the Power Supply nothing is broken or bent. To ensure this, replace power cable from the power supply to the hard drive with another power cable.
- In addition there is also a power cable data cable that connects the hard drive and motherboard. These cables can also affect your hard drive. Make sure the cord is not folded or bent, or you can replace it with another cable.
- Listen to the voices of the rotation in your hard drive, if there is unusual sound then it could be the cause is in the head or platter (disc) your hard drive. To overcome this, you need to disassemble the hard disk, and repair the damage inside. In improving the existing hardware in the hard drive you should be guided by the experts.
- Check the jumper on the hard disk, this jumper is located close to ports power and data cables on the hard drive.
EmoticonEmoticon